DESCRIPTION

The MC1ST microphone package contains all you need to set up one place in a recording studio. This package is produced for recording, broadcast, and sound reinforcement activities. It is suitable for recording both vocal and instrumental artists. The package includes a microphone, a mic stand, an XLR to XLR cable, and an XLR to ¼ inch adapter and a carrying case. The total weight of all that kit is 4.5 pounds. The microphone is a tough, practical product from Technical Pro. It has a black body and a gray steel mesh cage covering the head. Its frequency response range is 20 Hertz to 20 kiloHertz and an equivalent noise level of 18 decibels. It has a nominal impedance of 75 ohms with a load impedance above 1 kilo ohms. The microphone stand has a tripod base, a boom arm and a microphone clip. Its footprint extends to a width of 20 inches. The height of the microphone can be set from 29 inches off the ground up to 47 inches. The boom arm is 27 inches long and it slides out as far as 22 inches from the base pole. It is secured with a swivel clamp that includes a tightening knob to keep the boom in the position you select. The package includes a U EZ Mic Clip to fix the microphone to the end of the boom arm. However, the top of the stand, to which that clamp fits, is an industry standard 5/8 inch threaded end, which means you can swap the clip for any other you might buy. The stand also includes a cable pole clip to fix the mic lead and stop it dangling where it might get in the way. Mics connect to mixer panels either to an XLR connector or to a 1/4 inch socket. The pack includes an 8-foot XLR to XLR cable and an XLR to 1/4 inch socket adapter. This package is supplied by Technical Pro – a company that is renowned for the durability of its professional sound equipment. As a bonus, you also get a nylon carrying bag, which is designed to carry all of the components of the equipment in the pack. It measures 30 inches by 2 inches by 3 inches. You carry the stand in the body of the bag and there are pockets for the mic, clips, and cable.

SPECIFICATIONS

• Microphone Tripod
•  XLR Cable
•  XLR to 1/4” Adapter
•  Carrying Bag
•  Mic Case
•  For recording, broadcast, sound reinforcement, vocal & instrumental
•  8’ XLR male to female cable included
•  1 x XLR female to 1/4” (6.35mm) male adapter included
•  Zippered nylon carrying case
•  Zippered faux-leather microphone case
•  Polar Pattern: Cardioid (unidirectional)
•  Frequency Range: 42Hz-17KHz
•  Impedance: 600 ohms
•  Nominal Impedance: 75 ohms
•  Load Impedance: > 1 Kohm
•  Sensitivity: -77dB +/- 3dB/(@ 1KHz 94dB S.P.L.): 12.5mV/Pa
•  Equivalent Noise Level: 18dB
•  Frequency Response: 20Hz-20KHz • MAX S.P.L. for 0.5% THS @ 1KHz: 132dB
•  Retail Box: 4”L x 3.25”W x 30”H, 0.6lbs